T4PGF1 INSTRUCTION MANUAL Page 4
SHAW-ALMEX INDUSTRIES LIMITED June 14 2017
3. DECLARATION OF CONFORMITY
We,
Shaw-Almex Industries Limited,
of
P.O. Box 430, Parry Sound, Ontario,
Canada,
declare that the machinery:
Product: Temperature Control
Panel
Model: T4PGF1
Year of Design: 2014
has been manufactured using the following transposed harmonized European Standards:
• EN 60204-1 Safety
• EN 50081-1 Emissions (EN55011)
• EN 50082-1 Immunity (EN61000-4-2/3/4/5)
is in conformity with the following Directives:
• 73/23/EEC Low Voltage Directive + amendment
• 93/68/EEC
89/336/EEC EMC Directive + amendment
• 92/31/EEC
89/392/EEC Machinery Directive
and has been designed and assessed to comply with the following, in part or full where relevant:
• AS/NZS 3000:2007 - Electrical Installations (Australian/New Zealand Wiring Rules)
• AS/NZS 3007:2013 - Electrical equipment in mines and quarries (Surface installations and associated
processing plant)
• AS/NZS 2081:2011 - Electrical protection devices for mines and quarries
• AS/NZS 4871.1:2012 - Electrical equipment for mines and quarries (General requirements)
• AS/NZS 4871.4:2010 - Electrical equipment for mines and quarries (Mains powered electrical mobile
machines)
• AS 4242-1994 - Earth-moving machinery and ancillary equipment for use in mines (Electrical wiring
systems at extra-low voltage)
• MDG15:2012 - Guideline for Mobile and Transportable Equipment for Use in Mines
• MDG41:2010 - Guideline for fluid power systems safety at mines
Signed in: Parry Sound, Ontario, Canada
on
Name: Mark Dudas, Eng.
Position: Manager of
Engineering
To Next Page