Alpha ESS SMILE-B3-PLUS - Safety Data Sheets (SDS); Product Identification & Hazards

32
Section 1. Identication
Product Identier:
Product Name: Energy Storage System
Rechargeable Lithium-ion Battery
Models: SMILE-BAT-10.1P
SMILE-B3-PLUS
Other Means of Identication:
SDS #: SDS012
SDS001
Synonyms: Lithium Iron Phosphate (LiFePO4, LFP)
Proper Shipping Name (ADG Code): Lithium Ion Battery
Lithium Ion batteries contained in
equipment
UN/ID No: UN3480
UN3480
Recommended Use of the Chemical and Restrictions on Use:
Recommended Use Energy Storage; Battery Packs
Safety Data Sheets
Section 2. Hazards identication:
Classication of the hazardous chemical:
EXEMPT FROM HAZARD CLASSES AND CATEGORIES
ACCORDING TO AUSTRALIAN GHS.
Label elements, including precautionary statements:
No signal word, pictograms, hazard or precautionary statements
have been allocated according to GHS.
But there is other label for Transport of Dangerous Goods on
package.
Other hazards:
This product is an equipped with a Lithium Iron Phosphate
Battery, which is certied compliance under the UN
Recommendations on Transport of Dangerous Goods, Manual
of Tests and Criteria, Part III, sub-section 38.3. For the battery
cell, chemical materials are stored in a hermetically sealed
metal case, designed to withstand temperatures and pressures
encountered during normal use. As a result, during normal use,
there is no physical danger of ignition or explosion and chemical
danger of hazardous materials' leakage. However, if exposed to
a re, added mechanical shocks, decomposed, added electric
stress by misuse, the gas release vent will be operated. The
battery cell case will be breached at the extreme. Hazardous
materials may be released. Moreover, if heated strongly by the
surrounding re, acrid or harmful fume may be emitted.
Chemical Name CAS No
Weight
[%] 10.1
Weight
[%] B3+
SPCC-Fe
7439-89-6 15-20 20-25
Lithium Iron Phosphate (LFP)
15365-14-7 26-30 18-20
Iron
7439-89-6 11-14 13-16
Lithium Hexauorophosphate 21324-40-3 10-12 10-12
Copper Metal 7440-50-8 8-12 8-12
Carbon 7440-44-0 5-8 5-8
Aluminium Metal 7429-90-5 3-7 3-7
Polyester Resin 63148-65-2 3-5 3-5
Acrylonitrile-butadiene-sty-
rene (ABS)
9003-56-9 1-3 1-3
Polyvinylidene Fluoride 24937-79-9 1-3 1-3
Polycarbonate 25037-45-0 1-3 1-3
Nickel 7440-02-0 0-1 0-1
Details of Manufacturer or
Importer:
Alpha ESS Australia PTY. Ltd.
Suite 1, Level 1, 530 Botany Road,
Australia, Alexandria, NSW, 2015
+61 (0) 402 500 520
australia@alpha-ess.com
www.alpha-ess.com
Emergency Phone Number:
Emergency Telephone (24 hr) +61
1300 968 933 (Australia)
Section 3. Composition and information on ingredients
Section 4. First aid measures
Description of necessary rst aid measures:
Eye Contact: Rinse eyes with owering water for 15 minutes
and seek medical attention.
Skin Contact: Wash the affected area thoroughly with soap and
water for 15 minutes and seek medical attention.
Inhalation: If internal contents are inhaled, evacuate the
contaminated area, and seek medical attention.
Ingestion: If ingestion of internal contents occurs, rinse mouth
thoroughly with water. DO NOT INDUCE VOMITING. If vomiting
occurs naturally, have victim lean forward to reduce risk of
aspiration and continue to rinse mouth with water. Seek medical
attention immediately.
Symptoms caused by exposure:
Symptoms – Adverse effects not expected from this product.
Exposure to battery contents may cause irritation and
potential burns.
Medical attention and special treatment:
Notes to Physician Treat symptomatically.
www.alpha-ess.com
SAFETY DATA SHEETS