Alpha ESS SMILE-B3-PLUS - Induction Requirements

Owner’s Manual7
INSTALLATION & COMMISSIONING
2.1 Induction requirements (For Installers Only)
Following the SMILE B3 PLUS installation, ensure that the system owner or
nominated representative is provided the following information:
• Demonstration of the System shutdown & Start-up procedures,
• Introduction to the system manual,
• Explanation of the Alarm/Faults that may arise with the system,
• Contact details of Manufacturer/ system provider,
• Basic System Operation & design principles.
Further, ensure that a copy of the below customer acknowledgement is provided to
the system provider for their installation records.
Customer Acknowledgement
I, ……………………………………(Customer) acknowledge that ………………………………...
(System Provider) have attended my property and conducted the requested work.
Iconrmthattheinstallerattendingmypropertyhascompletedtheinstallation
basedonhis/herrecommendationforthemostefcientenergyproduction,
provided me all the information as per the induction requirements (Section 2.1) and
IconrmthatIhaveagreedtothisinstalllocation.
Customer’s Signature
Date:
Installer’s Signature
Date: