EasyManua.ls Logo

Alpha ESS SMILE-B3-PLUS - Chemical & Toxic Gas Hazards; Lifting & Handling Safety

Alpha ESS SMILE-B3-PLUS
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Owner’s Manual9
SAFETY
Warning:
Risks of chemical burn electrolyte or toxic gases.
The battery modules installed in the BESS are protected by multiple
Electrical protection devices and can be operated safely during standard
operation. However, there is a potential for the electrolyte leakage from the
battery pack as well as form toxic gases if damaged mechanically or break
down. Therefore, it’s recommended to proceed as follows,
Do not install the system in extreme low/high temperatures or humidity
exceeding the permitted range.
Do not place heavy objects on top of the system or mechanically damage the
batteries (by piercing, puncturing or deforming it)
Do not short circuit the battery module or allow them to come in contact with
metal.
Do not continue to use the battery module after a short-circuit.
Do not install the battery pack in the vicinity of any equipment containing
ammablegasesorliquids.
If the moisture penetrates the system (e.g. due to casing damage), please
do not operate the system and contact Alpha ESS immediately for further
troubleshooting.
If you come into contact with the electrolyte, please wash affected area with
water immediately, and consult a doctor immediately.
Risk of injury by hoisting or falling system
Inverters and batteries are heavy and can cause personal injury if the inverter
or battery is improperly lifted or dropped during transport or when attached or
removed from walls.
Lifting and transporting of SMILE-B3-PLUS/SMILE-BAT-5P must be conducted
by more than 1 person.

Other manuals for Alpha ESS SMILE-B3-PLUS

Related product manuals