Alpha ESS T100 - Battery Side-Wiring

______________________________________________________________________
Alpha ESS Co., Ltd.
Page 23 of 45
Your Smart Energy
b. Put the same cluster of batteries on the same rack with the serial number sequence of
01, 02, 03…07 from top to bottom.
c. All of the cluster battery gear No. shall be consistent.
d. When you are installing the battery, please handle gently to avoid scratches because of
the heavy battery.
e.After completing one rack, please check whether the installed batteries have the same
cluster No. and whether the gear No. is consistent.
f. Use the screws in packing list to fix each battery.
Battery Side-Wiring
Table 3 Parts in package required by battery wiring:
No.
Item
Description
No.
Item
Description
1
Screw
M6*16
(Battery package)
5
Power cable
Black-black
2500mm
2
Nut
M6*4
(Battery package)
6
Power cable
Red-red
130mm
3
Power line
Red-black
130mm
(Battery package)
7
Network cable 300mm
Connect the LMU port
of HV900112 with
battery COM.
4
Network cable
280mm
(Battery package)
8
Terminal resistance
Insert the BMU port of
HV900112
a. Please see the following figure, connect the power and COM cables among batteries.