55
We reserve the right to modify technical specifications without prior notice.
UK830300/170717 © Alpha-InnoTec GmbH
in DE: to the Alpha-InnoTec customer service department +49 (0) 9228 9906 199
in AT: to the Alpha-InnoTec customer service department +43 (0) 732 24 42 01 4
in CH: to the Alpha-InnoTec customer service department +41 (0) 62 748 20 01
in all other countries:
To the manufacturer’s local partner
COMpLETION REpORT ANd REqUEST FOR COMMISSIONING
During commissioning, the heat pump system will be inspected to ensure that it is functioning
properly. Technicians authorized by the manufacturer ensure that all factory specifications have
been checked and that the heat pump system can operate reliably over an extended period.
The factory commissioning involves costs and is mandatory for extension of the warranty services.
□
Initial commissioning
□
Re-commissioning
Heat pump type Regulator type
CONTRACTOR ENd CUSTOMER / OpERATOR
□
Electric
□
Heating
□
other company
Company
Contact Name / First name
Street address Street address
ZIP code / head office ZIP code / city
Phone Phone
Preferred date Alternate date
Date / time Date / time
Send the completed report 1 week before the preferred date together with the general checklist. If there is a conflict with the date,
you will be contacted by phone.
I/we hereby confirm that all preliminary work required for commissioning has been carried out and completed. A detailed and
thorough installation check has been conducted. The heat pump system is ready for operation.
Check once again:
Is the heating circuit filled and pressure tested; do the circulating pumps function properly?
□
No
□
Yes
Is the heat source system completed, inspected and OK?
□
No
□
Yes
Have the heating circuit, heat source system and circulating pumps been bled?
□
No
□
Yes
Are all electrical components permanently connected according to the circuit diagram; are all
sensors properly mounted?
□
No
□
Yes
Have all volume flows and water flow rates been checked and are they OK?
□
No
□
Yes
In the event that the heat pump system is not ready for operation and if installation work has to be performed by the commissioning
technician during commissioning, this will involve charges to the contractor. If the heat pump system is not ready for operation, the
commissioning technician can request a repeat commissioning, which will involve additional costs.
The contractor or an authorized representative must be present during commissioning.
The operator of the system should be present during commissioning in order to ensure that proper instruction is
received.
An acceptance report will be prepared during commissioning.
I, the undersigned, hereby request commissioning, in return for a fee.
Place, date Signature / company stamp
FAZ-WP Formblatt UK820522c Stand: 240407
Completion report for heat pump systems
To Next Page
Loading...
Need help?
General
