9
We reserve the right to modify technical specifications without prior notice.
UK830500/190402 © Alpha-InnoTec GmbH
Proceed as follows:
Inspect delivery for outwardly visible signs of dam-
age…
Check to make sure that delivery is complete.
Any defects or incorrect deliveries must be claimed
immediately.
NOTICE.
Note the model.
Overview “Technical data/scope of delivery” or
rating plate on unit.
ACCESSORIES NECESSARY FOR OPERATION
CAUTION.
Use only original accessories from the
manufacturer of the unit.
If the unit is to be used for heating hot water, a 3-way
switching valve must be installed. This is not included at
the time of delivery and must be ordered separately.
Installation
Observe the following when performing all work:
NOTICE.
Always comply with applicable accident
prevention regulations, with applicable
statutory regulations, ordinances and di-
rectives.
WARNING!
The heat pump or heat pump system may
be installed and assembled only by a quali-
ed technician!
NOTICE.
Observe the sound levels of the respective
model.
Overview “Technical data/scope of delivery”,
“Sound” section.
INSTALLATION AREA
CAUTION.
Install the heat pump only indoors.
The installation area must be frost-free and dry. It must
meet the requirements of DIN EN 378. It must also fulfill
applicable local regulations.
TRANSPORT TO INSTALLATION LOCATION
Always comply with the following safety information
during transport:
DANGER!
Several people are required to transport
the unit. Do not underestimate the weight
of the unit.
Overview “Technical data / scope of delivery”,
“General unit data” section.
To Next Page
Loading...
Need help?
General
