12
The data fields are different when you are navigating an active route and when you
have no specified destination (the orange line is not displayed).
Default data fields when cruising without a destination (tap and hold any of the fields
to change its value):
Field Description
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains
it.
Shows the current time corrected with time zone offset. The
accurate time comes from the GPS satellites, and the time
zone information comes from the map or it can be set
manually in Regional settings
.
(The current time is always displayed in the top left corner of
menu screens.)
Default data fields when navigating a route (tap and hold any of the fields to change
its value):
Shows the distance you need to travel on the route before
reaching your final destination.
Shows the time needed to reach the final destination of
the route based on information available for the remaining
segments of the route.
The calculation cannot take into account traffic jams and
other possible delays.
Shows the estimated arrival time at the final destination of
the route based on information available for the remaining
segments of the route.
The calculation cannot take into account traffic jams and
other possible delays.
To Next Page
Loading...
