Alpha ARES 150 Tec - Error Code

53
Error codes
1.10 ERROR CODES
When the boiler detects a fault, the alarm symbol is displayed on the screen together with the relative error code and description.
It is possible to reset the boiler by pressing key “A” .
Info DESCRIPTION detected on HSCP
0 Regular operation
1 Overheat ermostat
2 Low Gas Pressure
3 Overheat ermostat
4 Ignition Failure
5 Flame Lost
6 Overheating
7 Aux Temp. Sensor
8 Low Water Pressure
9 Outdoor Temp. Sensor
10 Internal Failure
11 Unexpected Flame
12 CH ow sensor
13 DHW Temp. Sensor
14 CH return sensor
15 Dierential Temp.
16 Frozen
17 Global Frozen
18 Global Dierential Temp.
19 Global Overheating
20 Gas valve leaking
21 Flapper Stuck Open
22 Lack air x ignit
23 Unexpexted Air Flux
Select
Alarm Reset
Generat or M anagement
Escape
HCM: Chi m ney Closed
°C
0
%
85
25
°C
A
°C
0
%
85
25
°C
fault indication
Select
error description
Generat or Managem ent
Alarm Reset
Escape
HCM: Chimney Closed