Alpine A110 2021 - Automatic Transmission (1;7)

To Next Page

To Previous Page

automatic gearbox (use) ............................

(up to the end of the DU)

changing gear ............................................

(up to the end of the DU)

driving ........................................................

(up to the end of the DU)

2.45

ENG_UD52290_3

Boîte automatique (XEF - Alpine)

Automatic gearbox

Operation

With the vehicle stopped, ignition

switched on and assisted parking brake

applied, the warning lights integrated

into switches R, N and D disappear.

Gearbox in position (P) or (N), with your

foot on the brake pedal (3 warning light

disappears from the instrument panel),

start the engine.

Selection controls

Switches R, N and D can be used to

select the various gearbox positions:

– position (R): reverse gear;

– position (N): neutral;

– position (P): parking;

– position (D): driving in automatic

mode;

– position (M): driving in manual

mode.

The 5 display on the instrument panel

shows the position and the indica-

tor 4, shows which gear is engaged.

AUTOMATIC TRANSMISSION (1/7)

Gear changing paddles 1

and 2

Paddles 1 and 2 can be used to change

gear when the gearbox is in “manual

mode” position (M) or in “automatic

mode” position (D).

1 Decrease switch for gear (-).

2 Increase switch for gear (+).

Positions (P), (N) and (R) cannot be ac-

cessed using the paddles.