5.23
ENG_UD54130_3
Batterie : dépannage (XEF - Alpine)
Start the engine of the vehicle supply-
ing the current and run it at intermedi-
ate engine speed.
Depending on the vehicle, unclip the
battery cover.
Lift the red tab 11 to access the termi-
nal 8 (+). Connect the positive cable H
to the positive terminal 8 then to the
positive terminal 9 of the battery sup-
plying the current.
Connect the negative cable G to the (–)
terminal 10 of the battery supplying the
current and then to the (–) terminal 7 of
the discharged battery.
Check that there is no
contact between leads G
and H and that the positive
lead H is not touching any
metal parts on the vehicle supply-
ing the current.
Risk of injury and/or damage to
the vehicle.
7
8
7
8
10
G
H
9
BATTERY: troubleshooting (4/4)
Start the engine, and as soon as it starts
running, disconnect cables A and B in
reverse order (7 - 10 - 9 - 8).
11
7
8
To Next Page
Loading...