MAP
2
28 - Navigation
Map
Displaying the map
From the home screen, press "Menu"
then "Navigation" to access the map.
You can also access the map from the
"Navigation" widget.
The map displays your current position
and the information that you
configured (display POI, weather,
traffic information etc.).
To move around the navigation map,
press and hold the map then slide your
finger across the screen in the
direction required.
Press
Q
to return to your current
position.
For safety reasons, carry
out these operations
when the vehicle is
stationary.
"Map" screen with a journey in
progress
A.
Journey information such as the
arrival time, additional time due to
traffic and the remaining distance to
the next stage or final destination
(depending on the parameters).
Note: pressing once on zone
A
will
enable the multimedia system to
display details on the journey stages.
B.
Information on traffic conditions
over the next few miles. Press this
area to view the list of incidents on the
route in progress.
C.
Pop-up menu.
D.
Views/Zoom:
– press the "±" button to display the
zoom in and zoom out buttons;
– press the "Views" button to display
the 2D/2DNorth, 3D/3D Inception,
"Traffic" view.
E.
Location and the name of the street
which you are on. Press to access
additional features.
F.
Navigation menu.
G.
Return to the previous screen.
Note: press and hold to return to the
main menu.
H.
Hazard area warning.
J.
Speed limit indicator panel.
K.
While a route is in progress,
information on upcoming road turns
and the name of the next street on
your route. Press the speaker icon
once to activate/deactivate the
guidance voice and repeat the last
voice instruction.
L.
Journey information such as your
arrival time, additional time due to
traffic and distance. Touch the unit to
view the journey stages.
M.
Information on the road types used
(motorways, toll roads, motorail).
To Next Page
Loading...
