Alpine A110 - Apps; Android Auto, Carplay

ANDROID AUTO™, CARPLAY™
5
Apps - 73
IntroductionAndroid Auto™
"Android Auto™" is an application that
enables you to replicate your
smartphone on the screen of your
multimedia system.
Note:
– the "Android Auto™" app only works
if your smartphone is connected to
your vehicle's USB port or wirelessly
by Bluetooth® to enable automatic
WIFI connection to your system;
– in order for the app to work properly,
the USB cable used must be
recognised by the manufacturer of
your smartphone and have a
maximum length of 1.5 metre;
– for the app to work properly with
WIFI, you smartphone must be paired
to the multimedia system.
For more information, please refer to
the section on "Pairing, unpairing a
telephone".
First use
Download and install the "Android
Auto™" application from the
application download platform on your
smartphone.
Connect your smartphone to your
multimedia system USB port or
connect it via Bluetooth® to initiate the
connection WIFI.
Accept the requests on your
smartphone in order to use the
application.
The application is launched on the
multimedia system and should be
visible from zone 1 .
If the procedure described above fails,
repeat the operation.
IntroductionCarPlay™
"CarPlay™" is a pre-equipped service
on your smartphone which enables
you to use some apps on your
smartphone via your multimedia
system screen.
Note:
– the "CarPlay™" service only works if
the SIRI service is activated and if your
smartphone is connected to your
vehicle's USB port or wirelessly using
Bluetooth® to enable automatic
connection to your system by WIFI;
– in order for the app to work properly,
the USB cable used must be
recognised by the manufacturer of
your smartphone and have a
maximum length of 1.5 metre;
– for the app to work properly with
WIFI, you smartphone must be paired
to the multimedia system.
For more information, please refer to
the section on "Pairing, unpairing a
telephone".
First use
Connect your smartphone to the USB
port on your multimedia system or
connect it via Bluetooth® to initiate the
WIFI connection.
The multimedia system suggests that
you:
– authorise the connection and data
sharing;
– remember the preferences for the
device.
Accept the requests on your
smartphone in order to use the
application.