Alpine A110 - Video

VIDEO
3
Audio/Multimedia - 57
"Video" menu
From the main menu, press
"Applications" then the "Video" menu.
Select a connected input source.
If several sources are connected,
select one of the input sources from
the following list to access the videos:
– "USB1" (USB port);
– "USB2" (USB port).
Note:
– some formats may not be
recognised by the system;
– the USB drive must be FAT32 or
NTFS formatted and have a minimum
capacity of 8 GB and a maximum
capacity of 64 GB.
Video playback is only
possible when the vehicle
is stationary. When driving,
only the soundtrack of the current
video remains active.
« Video »
When playing a video, you can:
– adjust the brightness by pressing the
button 2 ;
– adjust the playback rate by pressing
the button 3 ;
– access the pop-up menu 4 ;
– access the previous video by
pressing 7 if the playtime does not
exceed three seconds. After three
seconds, the video resumes from the
beginning;
– use the scroll bar 8 ;
– pause by pressing 6 ;
– access the next video by pressing 5 ;
– switch the video to full screen mode
by clicking twice on the image preview
area 1 ;
– return to the previous screen by
pressing on 9 .
Note:
– some functions are only available in
full screen mode;
– the play controls disappear
automatically after 10 seconds when
playing a video in full screen mode.
Pop-up menu
Using the pop-up menu 4 , you can:
– get detailed information about the
video (title, file type, date, filepath,
etc.);
– Accessing settings
«Information»
From this menu, you can access
information about the video (title, type,
time, resolution).