REVERSING CAMERA
6
90 - Vehicle
"Rear-view camera" menu
From the main menu, press "Settings"
then the "Vehicle" tab and select
"Parking assistance". Use this menu to
configure the reversing camera.
For further information on the
reversing camera, please see your
vehicle user manual.
Note:
– make sure that the cameras are not
obscured (by dirt, mud, snow, etc.);
– the reversing camera display is no
longer available (it is replaced by a
black screen) when the vehicle speed
is above approximately 6 mph (10 km/
h), depending on local legislation. A
message appears on the screen to
warn you that your speed is too high.
For safety reasons, carry
out these operations
when the vehicle is
stationary.
"Image settings"
You can adjust the following settings:
– brightness
3
;
– contrast
2
;
– colour
1
.
"Guide lines"
You can activate or deactivate the
moving guide lines
5
that indicate the
vehicle trajectory according to the
steering wheel position.
Fixed guide lines
4
The fixed guide line includes coloured
markers
A
,
B
and
C
that indicate the
distance behind the vehicle:
–
A
(blue) approximately 120
centimetres from the vehicle;
–
B
(white) approximately 60
centimetres from the vehicle;
–
C
(red) approximately 30
centimetres from the vehicle.
Moving guide line
5
(depending on the vehicle)
By default it is displayed in yellow on
the multimedia screen. It indicates the
vehicle trajectory according to the
position of the steering wheel.
To Next Page
Loading...
