Alpine A110 - Page 63

PAIR AND CONNECT A PHONE
4
Phone - 61
Note: if the function icon is highlighted,
this indicates that it is activated.
Your phone is now paired to the
multimedia system.
When you use the
"Hotspot" function, the
transfer of mobile data
required for it to operate may lead
to additional costs not included in
your telephone subscription.
Pairing another telephone
To pair a new telephone to the
multimedia system:
– activate the Bluetooth® connection
on your telephone and set its status to
"visible";
– from the main menu, select "Phone",
the pop-up menu, "Paired devices list",
"Add new device";
– select the telephone functions to be
connected;
– confirm by pressing "OK".
Note: if the function icon is highlighted,
this indicates that it is activated.
Your phone is now paired to the
multimedia system.
You can up to pair six telephones.
For safety reasons, carry
out these operations
when the vehicle is
stationary.
Unpairing a telephone
To unpair one or several telephones
from the multimedia system:
– from the main menu, select "Phone",
the pop-up menu, then "Paired devices
list" and, from the pop-up menu 8 ,
select the phone(s) to be paired;
– from the main menu, select
"Settings", "System", "Manage
devices", then from the pop-up menu
8 select the phone(s) to be unpaired.
Pop-up menu 8
From the pop-up menu 8 , you can:
– delete one or more paired devices;
– delete all paired devices.
Connecting, disconnecting a
telephone
Connecting a telephone
A phone must be paired before it can
be connected to the hands-free phone
system. For more information, please
refer to the section on "Pairing,
unpairing a telephone". Your phone
must be connected to the hands-free
phone system in order to use all its
functions.
Note: if no telephone is connected to
the multimedia system, some menus
will be disabled.
Connecting your telephone will enable
the multimedia system to access your
telephone functions. No copies of your
contacts or personal data will be saved
in the multimedia system.
The multimedia system does not
manage phones equipped with "dual
SIM". Adjust the settings on your
telephone to enable the multimedia
system to connect correctly.
Manual connection
From the "Phone" menu, access the
pop-up menu and select "Paired
devices list" to view a list of paired
phones.
Select the phone and the functions
that you wish to connect and make
sure the phone has Bluetooth®
activated and that it is set to "Visible".
Note: if a call is ongoing while the
telephone is being connected, it will
automatically be transferred to the
vehicle loudspeakers.