To Next PageTo Next Page
Need help?Do you have a question about the Alpine ASC-42 and is the answer not in the manual?
Details on model numbers, gas type, and required clearances to combustibles.
Essential pre-installation checks and safety precautions for common sense installation.
Adherence to codes, grounding, venting, servicing, operation, and fuel usage safety guidelines.
Technical data including orifice sizes, input ratings, pressures, and electrical/venting requirements.
Criteria for selecting a safe and compliant location for the fireplace installation.
Procedures for connecting the gas supply, including pressure testing precautions.
Specific minimum distances required from the fireplace and venting to combustible materials.
Recommendations for non-combustible hearth materials and installation considerations.
Instructions for framing the fireplace opening and finishing the surrounding area.
A list of Simpson Dura-Vent system parts required for installation.
Guidance on planning the direct vent system, including air intake and exhaust requirements.
Diagrams and clearances for proper placement of the vent termination.
Details and parts list for flexible horizontal venting installations.
Components list for both horizontal and vertical Simpson Dura-Vent terminations.
Allowable combinations for horizontal venting with Simpson Dura-Vent systems.
Diagrams for vertical, offset, and horizontal terminations with Simpson Dura-Vent.
Guidelines for installing 110V power for blower and low-voltage millivolt system for gas control.
How to properly secure the fireplace unit using its nailing tabs within the framed opening.
Steps for assembling and installing horizontal Simpson vent pipe, ensuring airtight seals and proper support.
Instructions for framing the vent termination opening and related clearances.
Specific clearance requirements for horizontal vent pipe to combustibles.
Procedures for installing vertical vent terminations, including clearances and firestop requirements.
How to adjust the primary air shutter for optimal flame characteristics.
Step-by-step guide for correctly placing logs in the firebox for proper burning.
Instructions for installing and using the optional remote control system.
Guidance on installing an optional wall thermostat for fireplace control.
Critical safety warnings and instructions to follow before attempting to light the appliance.
Step-by-step procedure for safely lighting the pilot and main burner.
Detailed instructions for lighting the fireplace pilot and burner.
Steps for safely turning off the fireplace burner and the main gas control.
Recommended annual maintenance tasks for the fireplace and venting system.
Care instructions for cleaning and maintaining decorative brass and stainless steel parts.
Information on how to obtain and replace the glass gasket.
Warnings and instructions regarding the glass panel, including cleaning and replacement.
Precautions and steps for servicing or replacing the thermopile/thermocouple.
Procedure for replacing broken or damaged logs, emphasizing proper placement.
Guidance on periodic inspection of the pilot and main burner for proper flame characteristics.
A comprehensive list of available replacement parts for the appliance.
Common problems, potential causes, and corrective actions for the gas control system.
General| Brand | Alpine |
|---|---|
| Model | ASC-42 |
| Category | Indoor Fireplace |
| Language | English |
