14-EN
Basic Operation
5 After setting, press the MODE button to return to the
normal mode.
NOTES
• To cancel MX mode for all music sources, press the MX
button to turn MX off.
• MX mode is automatically cancelled if no buttons are
pressed within 15 seconds.
• You cannot set the MX mode while RDS and DAB are active.
• Setting to MX OFF makes MX mode of each music source
OFF.
• This function is inoperable when DEFEAT is ON.
• By “Setting the external input Defeat Mode” (page 30) to
ON, operation is bypassed.
• Each music source, such as radio, CD, and MP3 can have
its own MX setting.
• On disks with both MP3 and CD-DA, as the source changes
from “MP3 to CD-DA” or “CD-DA to MP3”, the MX-mode
needs to switch. This switching process may increase the
time before a piece is actually heard.
• MX mode does not function when MX is ON for MW, LW
radio.
• When the ALPINE Digital Audio Processor is connected to
the Digital Output Connector, the Equalizer, Crossover, Bass
Focus, Time Correction and MX (Media Xpander) functions
cannot be used in the built-in CD mode.
The functions on the connected Digital Audio Processor side
take preference.
Quick Searching Function
You can easily select tracks and files.
1 Press the SOURCE button to set the desired source
mode.
(CD mode is explained here as an example)
2 When setting the CD mode, press and hold the Q.S.
button for at least 2 seconds. The mode changes to the
Q.S. (Quick Search) setting.
3 Select a desired track by turning the Rotary encoder
to the right or left.
• CD/Changer mode: Track can be selected.
• MP3 mode: File number can be selected.
4 When the setting is completed, the Q.S. mode is
canceled by pressing the Q.S. button.
NOTE
The Q.S. mode is automatically canceled after 10 seconds if no
buttons are pressed during step 2 and 3.
Setting the MX Mode
MX (Media Xpander) makes vocals or instruments
sound distinct regardless of the music source. The
radio, CD and MP3 will be able to reproduce the music
clearly even in cars with a lot of road noise.
1 Press the MX button to select MX ON.
2 Press the SOURCE button to select the source you
want to MX (Media Xpander)-correct.
3 Press and hold the MX button for at least 2 seconds to
select the MX mode.
4 Turn the Rotary encoder to select your preferred
mode or OFF.
FM (MX 1 to 3):
The medium to high frequencies become clearer, and
produce well balanced sound in all the bands.
CD (MX 1 to 3):
CD mode processes a large quantity of data. MX uses
this massive data quantity to enhance the sound
cleanly.
MP3/DAB (MX 1 to 3):
This corrects information that was omitted at the time
of compression. This reproduces a well-balanced
sound close to the original.
DVD/Video CD (MX 1 to 3):
MX 1 to 2 (MOVIE): reproduces the dialogue of movies
more clearly.
MX 3 (MUSIC): reproduces discs containing incidental
music, music clips, etc. more clearly and effectively.
AUX (MX 1 to 3):
Choose the MX mode (MP3, MUSIC, or MOVIE) that
corresponds to the media connected.
SOURCE
Rotary encoderMX
DISP/B.OUT TITLE MODE/Q.S.
To Next Page
Loading...
Need help?
General
