EasyManua.ls Logo

Alpine CDA-7998R - Technical Specifications; Unit Specifications

Alpine CDA-7998R
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47-EN
CAUTION
CLASS 1
LASER PRODUCT
(Bottom side of player)
GENERAL
Power Requirement 14.4 V DC
(1116 V allowable)
Maximum Power Output 60 W × 4
Maximum Pre-Output Voltage
5 V/10k ohms
Weight 1.9 kg (4 lbs. 3 oz)
CHASSIS SIZE
Width 178 mm (7")
Height 50 mm (2")
Depth 156.5 mm (6-1/8")
NOSEPIECE SIZE
Width 165 mm (61/2")
Height 60 mm (2-3/8")
Depth 18.5 mm (23/32")
Due to continuous product improvement, specifications and design
are subject to change without notice.
FM TUNER SECTION
Tuning Range 87.5 108.0 MHz
Mono Usable Sensitivity 0.7 µV
50 dB Quieting Sensitivity 1.1 µV
Alternate Channel Selectivity 90 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
MW TUNER SECTION
Tuning Range 531 1,602 kHz
Sensitivity (IEC Standard) 25.1 µV/28 dB
LW TUNER SECTION
Tuning Range 153 281 kHz
Sensitivity (IEC Standard) 31.6 µV/30 dB
CD SECTION
Frequency Response 5 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
PICKUP
Wave length 795 nm
Laser power CLASS I
REMOTE CONTROL
Battery Type "AAA" sized dry battery
Battery Quantity 2
Dimensions (W × H × D) 42 mm (1-21/32")
× 121 mm (4-25/32")
× 23 mm (29/32")
Weight (without battery) 50 g (1.8 oz)
Specifications

Table of Contents

Related product manuals