14-EN
The Low Pass Filter on this unit can be adjusted to suit your personal
taste.
Setting item: SUBW LPF
Setting contents:
OFF (Initial setting) / LPF 60 (Hz) / LPF 80 (Hz) / LPF 120 (Hz) /
LPF 160 (Hz)
All frequencies lower than the selected cutoff are output.
The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or
SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary
encoder. Depending on the installation location of your subwoofer, one
of these settings may sound better than the other.
Setting item: SUBW PHASE
Setting contents:
NORMAL (Initial setting) / REVERSE
When the subwoofer is on, you can select either SYS 1 or SYS 2 for the
desired subwoofer effect.
Setting item: SUBW SYS
Setting contents:
SUBW SYS 1 / SUBW SYS 2 (Initial setting)
SUBW SYS 1:
Subwoofer level changes according to the main volume setting.
SUBW SYS 2:
Subwoofer level change is different from the main volume setting.
For example, even at low volume settings, the subwoofer is still
audible.
* The illustration is for CDE-135EBT.
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3/WMA/AAC files.
Press VIEW.
The display will change every time the button is pressed.
Note
• When the TEXT SCR is set to SCR MANUAL, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time (except
Radio mode).
The display in Radio mode:
FREQUENCY CLOCK FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME TRACK NO./CLOCK TEXT (DISC
NAME)
*1
TEXT (TRACK NAME)
*1
TRACK NO./ELAPSED TIME
The display in MP3/WMA/AAC mode:
FILE NO./ELAPSED TIME (FOLDER NO./FILE NO.)
*2
FILE NO./
CLOCK FOLDER NAME FILE NAME ARTIST NAME
*3
ALBUM NAME
*3
SONG NAME
*3
FILE NO./ELAPSED TIME
The display in BLUETOOTH Audio mode:
BT A/ELAPSED TIME
*4
ARTIST NAME ALBUM NAME
SONG NAME BT A/CLOCK BT A/ELAPSED TIME
*1 Displayed during playback of a disc with CD text.
*2 Only for MP3/WMA/AAC disc mode.
*3 ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag
information, the ID3 tag/WMA tag information is displayed
(e.g., song name, artist name, and album name). All other
tag data is ignored.
*4 Depending on the connected mobile phone, the elapsed time
may not be displayed.
Adjusting the Low Pass Filter
Setting the Subwoofer Phase
Setting the Subwoofer System
Other Functions
00ALPINE.book Page 14 Sunday, November 20, 2011 6:35 PM
To Next Page
Loading...
Need help?
General
