23-EN
Dialing a Number In The Phone Book
Up to 1,000 names (at most 5 telephone numbers for each name) are
downloadable from a mobile phone. Dial a call by selecting a person
from the phone book list.
Setting item: PHONE BOOK
Notes
• The order of the list display depends on the setting of “PB ORDER”
(refer to “Changing the Phone book List Order” on page 21).
• If the call history or phone book of the mobile phone is added or deleted
while it is connected to the unit, the list displayed on the unit may not
be brought up to date. If it is not updated, you cannot correctly place a
call.
• You can display the information of a number stored in phone book by
pressing VIEW. Each press changes the display as Name Telephone
NO. Telephone label
*
Name
If the information can not be obtained, “NO NAME”,“NO NUMBER”
or “NO LABEL” will be displayed.
* The telephone label of a number depends on the number information
stored in Phone book of the mobile phone, which includes 5
types-GENERAL, MOBILE, HOME, OFFICE and OTHER.
Phone book Alphabet Search Function
You can select the first three letters to search for a desired name in
phone book list by using the Phone book alphabet search function.
For example:
Searching a name “Michael James”
The following example explains how the search is performed.
Depending on the setting in PB ORDER (refer to “Changing the Phone
book List Order” on page 21), the phone book is listed in first name or
last name order. Please search for the first name or last name according
to the setting.
1
Press or while in the phone book list, the phone book
alphabet search mode is activated.
The letter selection list is displayed.
2
Turn the Rotary encoder to select the first letter (e.g. M),
and then press .
The letter selection list is displayed.
3
Turn the Rotary encoder to select the second letter (e.g. I),
and then press .
The letter selection list is displayed.
4
Turn the Rotary encoder to select the third letter (e.g. C),
and then press ENTER.
The names stored in phone book which begin with “MIC” are
searched.
5
Turn the Rotary encoder to select the desired name (e.g.
Michael James), and then press ENTER to make the
call.
Notes
• The Alphabet Search Function is only applicable to English alphabetic
characters.
• During step 2 to 4, you can also press or to select the desired letter,
symbol, etc.
• If the selected name has several numbers registered in phone book, you
need to turn the Rotary encoder to select the desired number, and
then press ENTER.
•Press in step 3 or 4 to delete the current entry and return to the
previous step.
• You can search for a name by its first letter, first two letters or first three
letters. Press ENTER after entering the desired number of letters. A
list displays the names beginning with the entered letter(s).
If a second call is received during a current call, you can have the first
caller wait momentarily while you take the second call. When you are
finished with one call, you can switch to the other one.
If a second call is received during the current call (call1),
the information of second caller (call2) is displayed
instead of the current caller’s name. Press 2, the call
waiting mode is activated.
In this case, call1 is on hold, while you take call2.
Notes
• In the call waiting mode, press 1 or 2 to switch between the current call
and the person on hold.
• In the call waiting mode, press and hold 1 or 2 for at least 2 seconds to
hang up call1 or call2, and the other call will be answered
automatically.
• In the call waiting mode, you can press VIEW to change the display
between waiting number (1 or 2) and caller name.
Assign numbers that you dial frequently to presets for quick recall. You
can assign up to six frequently called phone numbers to number presets.
Select a number you want to preset from the Phone Menu
(PHONE BOOK, DIALLED, etc.). Press and hold any one of
the preset buttons (1 through 6) as the one that you wish
to store the number for at least 2 seconds.
The phone number you selected is stored in presets.
Notes
• If the name has several numbers registered in the phone book, press
ENTER after selecting the name. Turn the Rotary encoder to
choose the desired number. Press and hold any one of the preset
buttons (1 through 6) for at least 2 seconds. The selected number is
stored as a preset number.
• A total of 18 phone numbers can be stored in the preset memory (6
numbers for each mobile phone in the paired device list.) If a mobile
phone is deleted from the paired device list, the stored preset numbers of
this mobile phone are deleted, even when it is paired again.
• If you store a phone number in a preset with a previously stored
number, the current number will be cleared and replaced by the new
one.
1
Press any one of the preset buttons (1 through 6) that has
had a number stored in the phone mode.
The information (name/number) stored in the preset station is
displayed.
2
Press ENTER.
The stored preset number is dialed directly.
While calling, you can adjust the volume.
Turn the Rotary encoder to adjust the volume.
Note
• You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result in
feedback. Feedback is directly related to the volume. Turning down the
Call waiting function
Preset a number in the Phone Menu
(Shortcut dial)
Dialing the preset number
Adjusting the volume when receiving a
Call
00ALPINE.book Page 23 Sunday, November 20, 2011 6:35 PM
To Next Page
Loading...
Need help?
General
