30-EN
Alphabet Search Function
Quickly find an artist, album, etc. by the first letter in its title or name.
1
During search mode, press or to activate Alphabet
Search function.
2
Turn the Rotary encoder or press or to select the
desired initial letter (e.g. select “M”), and then press
ENTER.
A list which begins with the selected initial letter is searched.
3
Turn the Rotary encoder to select the desired item (which
begins with initial letter “M”), and then press ENTER.
The item is selected.
Note
• The Alphabet Search Function is only applicable to English alphabetic
characters.
Search Position Memory
During iPod/iPhone playback, you can quickly return to the
last-selected hierarchy level in the search mode.
Press .
The hierarchy you selected last in the search mode is displayed.
Note
• This function is unavailable when iPod is selected in “Setting the iPod
Control” (refer to “Setting the iPod Control” on page 28).
Random Play Shuffle (M.I.X.)
The Shuffle function of the iPod/iPhone is displayed as s on this unit.
Shuffle Albums:
The songs on each album are played back in the order they were
recorded. Upon completion of all the songs on the album, the next
album is selected randomly. This continues until all albums have
been played.
Shuffle Songs:
Song shuffle randomly plays back songs within a selected category
(playlist, album, etc.). The songs within the category are played just
once until all songs have been played.
1
Press 5 s.
The songs are played back in random sequence.
s
*1
s
*2
(off ) s
*1 Shuffle Albums.
*2 Shuffle Songs.
2
To cancel M.I.X. play, select (off) with the above procedure.
Note
• If a song is selected in the album search mode before selecting M.I.X.
play, the songs will not play back randomly even when Shuffle Albums
is selected.
Shuffle ALL:
Shuffle ALL plays all songs in the iPod/iPhone randomly. Any one
song does not play back again until all songs have been played back.
1
Press 6.
The songs are played back in random sequence.
s ALL
*
(off) s ALL
* Shuffle ALL.
2
To cancel M.I.X. play, select (off) with the above procedure.
Notes
• If Shuffle ALL is selected, the selected songs being played back in the
search mode are cancelled.
• This function is unavailable when iPod is selected in “Setting the iPod
Control” (refer to “Setting the iPod Control” on page 28).
Repeat Play
Only Repeat One is available for the iPod/iPhone.
Repeat One:
A single song is repeatedly played back.
1
Press a 4.
The song is played back repeatedly.
a
*
(off) a
* Repeat One.
2
To cancel repeat play, select (off) with the above
procedure.
Note
• Depending on the connected iPod, track up/down may be not available
during Repeat play.
Displaying the Text
You can display the tag information of a song in the iPod/iPhone.
Press VIEW.
Each press changes the display.
Note
• When the TEXT SCR is set to SCR MANUAL, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time.
TRACK NO./ELAPSED TIME TRACK NO./CLOCK ARTIST NAME
*
ALBUM NAME
*
SONG TITLE
*
TRACK NO./ELAPSED TIME
* TAG information
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
information.
Notes
• Only alphanumeric characters (ASCII) can be displayed.
• The maximum number of characters for the head unit is 128 (128 byte).
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed if text information is not supported by the
unit.
00ALPINE.book Page 30 Sunday, November 20, 2011 6:35 PM
To Next Page
Loading...
Need help?
General
