Alstom MiCOM P54 Series - Page 896

P54x/EN SC/La4 SCADA Communications
(SC) 13-2 MiCOM P543, P544, P545 & P546
SC
3.8 Test mode 23
3.9 Disturbance records 23
3.10 Blocking of monitor direction 23
4. DNP3.0 INTERFACE 24
4.1 DNP3.0 protocol 24
4.2 Object 1 binary inputs 24
4.3 Object 10 binary outputs 24
4.4 Object 20 binary counters 25
4.5 Object 30 analog input 26
4.6 Object 40 analog output 26
4.7 DNP3.0 configuration using MiCOM S1 Studio 26
5. IEC 61850 ETHERNET INTERFACE 27
5.1 Introduction 27
5.2 What is IEC 61850? 27
5.2.1 Interoperability 27
5.2.2 The data model 27
5.3 IEC 61850 in MiCOM relays 29
5.3.1 Capability 29
5.3.2 IEC 61850 configuration 29
5.3.2.1 Configuration banks 30
5.3.2.2 Network connectivity 30
5.4 The data model of MiCOM relays 30
5.5 The communication services of MiCOM relays 31
5.6 Peer-to-peer (GSE) communications 31
5.6.1 Scope 31
5.6.2 IEC 61850 GOOSE configuration 32
5.7 Ethernet functionality 32
5.7.1 Ethernet disconnection 32
5.7.2 Loss of power 32
6. SK5 PORT CONNECTION 32
FIGURES
Figure 1 EIA(RS)485 bus connection arrangements 5
Figure 2 K-Bus connection arrangements 7
Figure 3 Second rear port K-Bus application 11
Figure 4 Second rear port EIA(RS)485 example 12
Figure 5 Second rear port EIA(RS)232 example 12
Figure 6 Behavior of DNP3.0 control inputs 25
Figure 7 Data model layers in IEC 61850 28