MAINTENANCE
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
105
Continued from previous page
Setting the cleaning
frequency hours
4. Touch the “Hours” setting 3 to set the cleaning frequency hours. Enter the
desired hours using the key pad. Touch the check mark.
Setting the cleaning
frequency day and
time
5. Touch the “Date & Time” setting 4 to set the day and time for cleaning.
Touch the check box
5 next to a day to set it. Touch the check mark.
6. The “Set cleaning frequency hours” screen will display.
Touch the “AM”/”PM” button 6 to choose whether the cleaning time is set
for AM or PM.
Enter the time of day for the cleaning. Touch the check mark.
Touch the check mark on the “Set Cleaning Frequency” setting screen.
Result The cleaning frequency has been set.
To Next Page
Loading...
