INSTALLATION
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
23
How to Unpack the Oven
Before you begin Make sure you have:
▪ An appropriate lifting device and enough personnel to safely move and position
the weight of the oven.
□ CMC-H2H: 304 lb (138 kg)
□ CMC-H3H: 394 lb (179 kg)
▪ Cutting tools to remove the packaging.
Unpack the oven To unpack the oven, do the following.
1. Remove the box. Save all packing materials for inspection by the carrier.
2. Remove the shrink wrap.
3. Cut the restraining straps.
4. Remove the probe from the foam block.
5. Remove the foam from each chamber.
6. Remove the oven from the pallet.
Result The oven is now unpacked.
NOTE: Examine the appliance for damage. If the appliance
has been damaged, do not use the appliance until it has
been inspected by an authorized service provider. Contact
your carrier or Alto-Shaam customer service.
To Next Page
Loading...
