INSTALLATION
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
28
Continued from previous page
4. Apply thread sealant to the threads of the adapter fittings.
Install the elbow from the kit onto the adapter fitting.
5. Install the adapter fittings and elbows onto the water inlets with slip joint
pliers. Tighten the fittings until the elbows have a slight downward angle.
6. Install the water hoses onto the elbows.
Continued on next page
CT-TS-012062
Untreated Treated
To Next Page
Loading...
