OPERATION
Converge® ▪ Operator’s Manual ▪ MN-47239 ▪ Rev 3 ▪ 5/23
65
Continued from previous page
9. Touch the chamber temperature set-point icon 8. Enter the chamber
temperature set-point using the key pad. Touch the check mark.
10. Touch the fan speed icon 9 to set the fan speed. Enter the fan speed using
the key pad. Touch the check mark.
11. Touch the plus icon : to add an additional stage or action.
Touch the delete icon ; to delete a stage or action.
12. Scroll to “Pictures” to add a photo to the recipe.
13. Scroll to “Categories” to add the recipe to a category.
Continued on next page
To Next Page
Loading...
