Alto SSE 430 - Fresh Water Tank Filling

33
0
1
2
3
4
5
1
3.7 Filling the fresh water
tank
1. Empty dirty water tank
before filling fresh water
tank. (Chapter 6.2)
2. SSE 430: Close fresh water
drain tap (1).
3. Fill clean water into fresh
water tank. Max.
temperature 40ºC.
4. Add cleaning agent as per
metering instructions.
5. Maximum tank filling levels:
SSE 430: 35 litres
SSB 430: 30 litres
6. Observe maximum filling
level on indicator.
Only use cleaning agents
approved by Alto (chapter 5.5).