Alto SSE 430 - Controls Overview; Before Putting Machine Into Operation

30
1
2.2 Controls For illustration see fold-out page
at front of these operating
instructions
1 Hand switch
2 Switch for cleaning agent
supply
3 Suction unit switch
4 Battery warning lamp (SSB
430 only)
5 Release switch
6 Star knob for adjusting
handle height
7 Dirty water tank
8 Fresh water tank
9 Disk brush
10 Closing clamp (SSB 430
only)
11 Suction nozzle
12 Discharge hose
13 Suction hose
14 Cleaning agent metering
lever
15 Fresh water drain tap (SSE
430 only)
16 Power cable (SSE 430 only)
17 Lever for lifting suction
nozzle
18 Brush motor protection
switch
3 Before putting the automatic
cleaning machine into operation
3.1 Scope of delivery SSB 430
• Basic machine
• Suction nozzle with suction
lips
• Standard scrubbing brush
• Battery connecting cables
• Operating instructions
SSE 430
• Basic machine
• Suction nozzle with suction
lips
• Standard scrubbing brush
• Extension cable (20 m)
• Operating instructions
3.2 Assembling the
automatic cleaning
machine
The automatic cleaning
machine is delivered ready
assembled, with the exception
of the following parts:
• Suction nozzle
• Brushes
• 20m extension cable (SSE
430 only)
1. Loosen star knob (1).
2. Move handle to working
position.
3. Tighten star knob.