Convect Bake or Convect Roast
o set a Favorite cycle, a
ook & Hold function must be either
active or just programmed.
To set a new Favorite c
cle or to save a cur-
rently runnin
ook & Hold as a Favorite:
1. Pro
ram a Cook & Hold cycle as described in the Cook &
e 8.
2. Press and hold the Favorite
• The newly set or currently runnin
erature for the set Cook & Hold cycle will
e displayed. (If no Cook & Hold cycle has been pro-
rammed, “nonE” is displayed.
2. Press the Bake, Convect Bake or Convect Roast (select
• The selected cycle indicator word will light in the display.
• The cooking time will light in the display
When the cookin
time has elapsed:
• The selected cycle word will turn off.
•H
will display.
To cancel a Favorite cycle in pro
ad.
• The stored Favorite c
eratures are carefully tested for accuracy at the
actory. It is normal to notice some bakin
erences between a new oven and an old one. As ovens
et older, the oven temperature can shi
ust the oven temperature if you think the oven i
her or lower than your recipe recommends, then bake
he results of the first bake should
erature:
1. Press the Bake pad.
2. Enter 55
by pressing the appropriate number pads.
3. Press and hold the Bake pad for several seconds or until 0
f the oven temperature was previously adjusted, the
hange will be displayed. For example, if the oven tem-
erature can be increased o
the oven temperature (5, 10, . . . 35). Continuin
.
5. The time of day will automatically rea
ust the oven temperature if there is a
power failure or interruption. Temperature ad
ustment applies
to Bake, Convect Bake and Convect Roast (select models)
on
1. The factory default setting for temperature is Fahrenheit.
2. To change the setting, press and hold the
or three seconds.
3. A sin
e will
return to the existin
ive seconds and the settin
ete.
Reviewed by Stewart, Steven | Released