Amana CRC21T2 User Manual

RS2230003 Rev. 1 18
Programming Instructions
User Options
1. Open oven door. Display shows
“MENU b OR d – READY”.
• If door is closed or RESET pad is pressed before
finishing programming sequence, oven exits
programming mode.
2. Press and hold pad 1 for approximately 5 seconds.
• After 5 seconds, signal sounds. Display shows
“Pb” or “Pd” indicating “b” or “d” menu.
3. Press POWER LEVEL pad.
• Displays shows “OP:1(0,1-3)”.
• “OP” represents optional program mode, first
number represents option number and second
number represents functions currently selected for
option.
Numbered
Pads
Display Options
( ) = Factory Setting
1OP:10
OP:11
Prevents addin
g
heatin
g
time while oven is heatin
g
.
(Allows adding heating time while oven is heating.)
2OP:20
OP:21
Sounds 3 second si
g
nal at end of heatin
g
c
y
cle.
(
Sounds 4 short signals at end of heating cycle.)
3OP:30
OP:31
(Allows 99 minutes 99 seconds of heating time.)
Allows 10 minutes of heatin
g
time.
4OP:40
OP:41
Prevents si
g
nal when pad is pressed.
(Allows signal when pad is pressed.)
5OP:50
OP:51
(Allows oven to resume heating time countdown after door is opened during cycle.)
Cancels heatin
g
time count down after door is opened durin
g
c
y
cle.
6OP:60
OP:61
(Allows use of power levels.)
Prevents use of power levels.
7OP:70
OP:71
OP:72
OP:73
Eliminates end of heatin
g
c
y
cle si
g
nal.
Sets end of heatin
g
c
y
cle si
g
nal volume to low.
Sets end of heatin
g
c
y
cle si
g
nal volume to medium.
(Sets end of heating cycle signal volume to high.)
8OP:80
OP:81
Sets oven to standard operation. Blower starts when oven starts.
(Sets oven to instant
−
on operation. Blower starts when oven door is opened.)
9OP:90
OP:91
(Allows use of variable time entry and preprogrammed pads.)
Allows use of prepro
g
rammed pads onl
y
.
0OP:00
OP:01
(Allows lockout to be programmed.)
Prevents lockout from bein
g
pro
g
rammed.
4. Press START pad to advance to next option. See
table for options.
5. Press number pad (0,1-3) to change option.
6. Press START pad to save changes.
• Repeat steps 4-6 to change additional options.
7. Press RESET pad or close oven door to exit
programming mode.

Amana CRC21T2 Specifications

General

Brand	Amana
Model	CRC21T2
Category	Microwave Oven
Language	English