The control panel on your Radarange Microwave Oven looks like the
picture at left. In this session you'll only use the areas outlined.
9
READOUT DISPLAY
• When cooking with time, it shows remaining cooking time.
• When cooking with temperature, it shows set temperature and actual
temperature.
• Chevrons, or arrows, light up to indicate cooking function.
• Display will be blank when oven is not in use.
NUMBERS -- Used tq program everything into the Touchmatic
Control. They're arranged just like a touch-type telephone.
RESET _ Used to cancel all instructions given to the Touchmatic
Control. Pressed before programming any oven instructions.
START SWITCH -- Pushed to start cooking operation. You
must program cooking time or temperature before pushing start switch.
At some time while you're learning to use your Radarange Oven you
may make a programming mistake. If you do make a mistake, or are
confused about what you've done -- it's easy to get back on the
right track.
-- If the oven isn't operating yet -- Press i
This wi!! cancel all the instructions you've given the oven and you can
start again.
If oven is operating, open the oven door, then press
This will erase everything you've set the oven to do and you can start
again.
To Next Page
Loading...
Need help?
General
