20
temperature is 110 ° F_ The number on the actual temperature
readout will increase until the programmed temperature is
reached.
The Radarange Oven will sound a tone when the programmed
temperature is reached and both numbers displayed are the
same.
Open the oven door when you hear the tone. (Don't worry if you
don't open the door immediately, because the Radarange Oven will
hold the water at 190° F until you stop it, as you will learn in
"Holding at Temperature",) Remove probe from oven,
J, Add instant coffee to water.
Note: In this example, you cooked to temperature using Full Power.
You can also cook to temperature using a lower Cookmatic
power level. For example, if you were heating milk you would
want to cook at Cookmatic Level 8 to 140 = F. To cook at a
lower Cookmatic Level, complete Steps "A" through "F" on
the previous page, then press the Cookmatic Level number
and
pad. Then press the middle number of desired
temperature° Push
switch.
Summary
To Cook to Temperature
1 Insert probe into food and oven receptacle.
2, Press
3.
4.
If less than full microwave power is desired, press Cookmatic power
level number, then press
Press middle number of desired end temperature (to cook to 140 ° F,
press ).
To Next Page
Loading...
Need help?
General
