Version 1.0 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 8
4.4 Connecting WH31P to WS-2902C, WS-2902D
Note: WH31P sensor data is not displayed on the WS-2902B, WS-2902C, WS-2902D display. The data
passes through to the Ambient Weather Network (AWN) where you can view the readings on your
personal weather dashboard. The WH31P’s readings cannot be calibrated. You may sync the sensor to
the console using the following method
1. Bring the sensor within 10 feet of the console
2. Unplug the power and remove batteries from the console
3. Insert power cable back into the console
4. Press the Light/Snooze button for 30 seconds
5. When the console is connected to WiFi and AWN the temperature tile will appear
on your dashboard
4.5 Connecting WH31P to OBSERVERIP, OBSERVERIP2.0
On the OBSERVERIP the WH31P sensor data can be viewed on the Live Data screen of the
OBSERVERIP IP Tool as well as the data passes through to your Ambient Weather Network dashboard
To Next Page
Loading...
Need help?
General
