Firmware Update
Important: Always make sure your unit is powered from a reliable external source. A brownout may
render your Master Lockit a service case.
Select File through your local file browser or drag ‘n’ drop a file through open explorer/finder. Navigate
the update file, then click Upload & Restart. A 5 minute countdown will initialize after successful
upload after which you need to log back in to the WiFi. If the page doesn’t refresh automatically, hit the
reload button on your browser. If the firmware update involves an update to the Lockit firmware (which
will be the case mostly) the unit will automatically power down after a while. Press and hold the config
wheel until the LEDs rapidly flash alternating, then release and let the Master Lockit boot through.
About
See detailed information of your system environment such as code revisions and the unit’s serial
number. A debug logging is available for diagnostics.
Shutdown
Which will completely shutdown the unit.
Note: thje server will take about 30 seconds to claose the database, leave unit connected to power
until the blink code changes to charge mode.
Help
Clicking here will open this very file
To Next Page
Loading...
