Ambient Lockit Timecode - Jam; Edit

ACN-ML/ACN-MLP experience quality.
Rev. 5.10
www.ambient.de/en
27
UB
↑
Show (t)
Jam
Edit
Show
Toggles userbits to be displayed in main screen, will reduce the font size of TC.
Jam
On
Off
“On”: Userbits will be jammed on change. This will happen on TC Jam but also on every change without
the TC generator being interrupted. When C-Jam is enabled this can be used to increment scene/take
on the fly via ACN.
Note: Update will occur with up to 6 seconds delay on the next C-Jam broadcast.
“Off” Userbits will be locked. Use this mode to apply a fixed ID through userbits.
Edit
Allows manual changes to userbits on the fly, enter 8 UB digits with hex-code values 0-F. On changing
existing UB value a prompt will pop up to confirm or discard the new value. This will override the
current value but not change jam mode itself. So, for static ID set Jam to “Off”