System Menu
The gear wheel on the right opens a drop down menu for maintenance.
WiFi Settings
If desired you can rename WiFi here for better identification. Especially for multi-camera shoots, it is
highly recommended to rename the MasterLockit’s WiFi name to clearly identify its position and
determine whether or not the unit is set to hub mode. After hitting reconfigure WiFi, the MasterLockit
will immediately apply the new SSID so you will lose connection and need to log in again with new
credentials.
Note: The password always coincides with the SSID. As such, it must be at least 8 digits long. Make sure
you use a name that identifies the unit uniquely. Names like “soundcartHUB”, “camera-1”, or simply
ascending numbers can later greatly help to better identify the individual units. This works well with the
option to assign unit names in the ACN Radar.
System Reset
This will purge the database, reset the metadata server and restart in Satellite mode with default of 25
FPS and ACN Channel 18. This can be indicated when the unit needs to be attached to a different
camera or was in use before on a different set. We recommend to do a reset at the start of a project
especially when using the metadata network.
Note: This will also reset your WiFi to the default SSID
To Next Page
Loading...
