Clip Metadata also is your gateway for all kind of reports and logs like camera shot logs, slate logs etc.
Again you can select device classes, shooting day, timecode range and download direct or to an
attached USB stick.
Lens Metadata
Only Available on MasterLockitPlus.
Here you can see and export data from a connected ZEISS CP.3 XD lens.
Note: this requires a dedicated cable, MLC-CP between ACN (grey) Lemo and lens. On PL mounts,
powering will be either through MasterLockitPlus with external power or camera. On cameras with EF
mounts, power to the lens will only be through looped through power applied to. Supply voltage must
range between 12 and 24 V to ensure reliable power to the lens.
To Next Page
Loading...
