What to do if Ambit PIB v1.5 Water Pump shows 'OCL' in display and constant beeping?
If the Ambit Water Pump displays “OCL” and beeps constantly after 3 minutes during infusion, it indicates a fluid path occlusion. Make sure that all tubing clamps are open. Check the access device patency and inspect the tubing for any kinks.
What to do if blood backed into tubing in Ambit Water Pump?
If blood is backing into the tubing of your Ambit Water Pump, verify that the tubing is connected correctly, ensuring the patient side connects to the patient and the bag side connects to the bag. Also, confirm that the pump is in run mode. Attempt to clear the tubing by delivering a bolus. If you cannot clear the tubing this way, close the tubing clamp and replace the cassette. If the situation continues, manufacturer’s service/ assistance may be required.
General| Brand | Ambit |
|---|---|
| Model | PIB v1.5 |
| Category | Water Pump |
| Language | English |
To Next Page
