Mower
operation
Before operating new mower
1.
Check safety interlock system (see next page).
2. Check engine oil level:
(a) Place machine on level surface;
(b) Remove dipstick from oil filler tube and check oil level;
( c) Add oil accordjing to engine manufacturers specifications;
( d) Replace dipstick.
3.
Clean around the fuel tank cap and remove.
Fill with unleaded petrol.
Replace cap.
4.
Check tyre pressures.
Recommended pressures:
Front: 280kpa maximum.
Rear: 140kpa maximum.
5.
Check general machine condition.
-
14
To Next Page
Loading...