Amcrest IP2M-841 - Page 20

20
Note: Move the
camera or the
phone to ensure
that the entire QR
code is visible and
focused in the
frame. In case the
QR code cannot
be scanned,
please tap Enter
S/N Manually to
enter in the
camera’s serial
number.
8. Scan the QR code [QR code icon] from the sticker
on your camera.
9. Double check to ensure that your S/N (Serial
Number) is entered correctly. Then, tap Next.
Note: The default
username is admin
and the default
password is admin.
10. Give your camera a name, then enter in the
camera’s username and password. Once you’ve
filled out all of the fields, tap Next.
11. Pick a WiFi network, enter in the password, and
tap Next.