Amcrest IP4M-1041B - Information

46
• Auto Reboot: This checkbox allows the user to enable the auto reboot function. The dropdown box and field to the
right of this checkbox allow the user to specify what date and time of the week the camera will auto reboot.
• Auto Delete Old Files: This checkbox allows the user to enable the auto deletion of old files on the camera.
• Manual Reboot: This button allows the user to manually reboot the camera.
To refresh the page, click the Refresh button. To save the settings, click the Save button.
Upgrade
This menu allows the user to upgrade the camera’s firmware.To upgrade the firmware for your camera, follow the
steps provided below:
• Go to amcrest.com/firmware
• You will be taken to an Amcrest firmware downloads page. Search for the model number of your camera and
download the latest firmware file.
• Return to the web user interface for your camera and press the Browse button to locate and import the firmware
file you just downloaded.
• Once the firmware file has been imported, click Upgrade.
• The device will reset, return to the web user interface. The upgrade is now complete.
Note: When upgrading the camera’s firmware, do not disconnect the internet or power from the camera.
Information
This menu section allows the user to view information about the camera for reference purposes.
Version
This screen allows the user to see various information about the camera’s software versions, as well as other
information. On this screen, software version, web interface version, and ONVIF version are displayed. Also, the
S/N (Token ID) is displayed here.
Log
This screen is where the camera’s activity log is kept. To view logs for a specific time period, modify the start time
and end time fields, choose the type of event (system, setting, data, event, record, manage users, clear log), and
click search.
To back up the log, click the Backup button. To clear the log, click the Clear button.
Remote Log
This screen is where all remote activity logs are kept. This is useful to set a centralized area for remote syslog
information for any remotely connected devices. Below is a screenshot of the remote log menu: