35
• Alarm Delay: This field specifies in seconds how long the delay between alarm activation and Relay alarm
activation should be.
Send Email: This checkbox allows the user to enable the camera to send an email when a video tampering alarm is
triggered.
• Snapshot: This checkbox allows the user to enable the camera to take a snapshot when a video tampering alarm is
triggered.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
Audio Detection
This menu allows the user to modify audio detection settings. Below is a screenshot of the Audio Detect screen:
VSPIn Enable: This checkbox enables an audio detection alarm for the camera.
Sound Threshold: This dropdown menu sets the amount of db that is necessary for the audio detection function to
trigger. The default sound threshold is 60db.
Record: This checkbox allows the user to enable the camera to record video when an alarm is triggered.
Record Delay: This field specifies in seconds how long the delay will be between alarm activation and recording.
Send Email: This checkbox allows the user to enable the camera to send an email when an alarm is triggered.
PTZ: This checkbox allows the user to enable PTZ events to be sent from the camera when alarm is triggered. This
event can be sent via email alerts or via the web interface directly.
Snapshot: This checkbox allows the user to enable the camera to take a snapshot (1, 3, or 5) when an alarm is
triggered.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
Abnormality
This menu allows the user to adjust abnormality event settings. This menu has 2 tabs: Network, and Illegal Access.
SD Card
This tab allows the user to set the camera’s response to an SD card related abnormality. Below is a screenshot of
the SD card tab screen:
Below is an explanation of the fields on the SD Card settings tab:
To Next Page
Loading...
