Installation
Page 3-11
SATA1 / SATA2: Two Serial ATA Connectors
SATA3 / SATA4 (Optional): Two Serial ATA
Connectors from Marvell SATA PHY.
These connectors enable you to connect Serial
ATA devices that conform to the Serial ATA
specification.
SATA2 SATA1
SATA3
SATA4
CP80P: 80 Port Debug LED
Provides two-digit POST code to show why the
system fail to boot. Allows quick and easy
optimization.
80 Port Debug 7-segment LED display
(Refer to Appendix C for POST codes)
1
GND
A-B-
B+
GND
A+
GND
C1394-1 / C1394-2 : (Optional)
IEEE 1394a (FireWire) Connectors
This mainboard has 2 IEEE 1394a ports. To use these
ports, you need to attach the bundled 1394 bracket
to these headers.
10
2
9
1
TPA+
TPB+
TPA-
TPB-
GND
+12V (Fused)
+12V (Fused)
GND
GND
Key
C1394-1
C1394-2
To Next Page
Loading...
