BIOS
Page 4-13
PCI PME From Soft-Off
An input signal from PME on the PCI card awakens the system from soft-off state.
Options: Enabled, Disabled.
WOR (RI#) From Soft-Off
An input Ring-In signal from the modem awakens the system from a soft-off state.
Options: Enabled, Disabled.
USB Resume from S3/S4
This item allows a USB device to wake-up the system from S3/S4 suspend state.
Options: Enabled, Disabled.
Power-On by Alarm
When set to Enable alarm resume, you can set the date (of month) and time (hh:mm:
ss), that will awaken a system which has been powered down.
Options: Enabled, Disabled.
AMD K8 Cool’n’Quiet control
Reduce the noise and heat from your PC when AMD’s Cool’n’Quiet
TM
technology is
enabled.
Options: Auto, Disabled.
POWER ON Function
Enables computer power on by keyboard, mouse, or hotkey activity.
Password: Requires you to enter a password when using the keyboard
to power on. Set the password in the next field “KB Power ON
Password.”
Hot KEY: Enables you to use a hot key combination to power on the computer.
Set the hot key combination in the “Hot Key Power ON” field.
Any KEY: Enables you to set any keyboard activity to power on the computer.
BUTTON ONLY: Requires you to push the computer power button to power on the
system.
Keyboard 98: Enables you to set the Windows 98 key to power on the system.
KB Power ON Password
Press “Enter” to create a password that is required when you use the keyboard to
power on the system. You must set the POWER ON Function to “Password” to be
prompted for a password at power on.
(default)
To Next Page
Loading...
