EasyManua.ls Logo

AMD XILINX VPK180 - Page 58

AMD XILINX VPK180
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The ACAP (U1) banks 208/209/210/211 GTM transceivers are split and wired to the QSFPDD1
connector J1 and QSFPDD2 connector J2. The connectors are Molex connector 2147334000
rated at 112 Gb/s per lane.
The transceivers are wired in an opmized paern to allow the QSFPDD1 connector to be
operated at 112 Gb/s per lane and QSFPDD2 can be operated at 56 Gb/s per lane. This
conguraon was chosen to provide 800GAUI-8 funconality. However, while QSFPDD1 is
operang at 800 Gb/s modes, QSFPDD2 cannot be used. To use QSFPDD2, QSFPDD1 is limited
to 56 Gb/s. This allows for both connectors to be operated simultaneously at 400GAUI-8 or
similar modes.
For connecvity details, see the table in the Transceivers secon and schemac page 57. See the
Versal ACAP GTM Transceivers Architecture Manual (AM017) for more details on 112 Gb/s GTM-
Quad conguraons.
GTM111/112/117/118: QSFPDD3/4
[Figure 3, boom and lower le callout 14]
The ACAP (U1) banks 111/112 GTM transceivers are wired to the QSFPDD3 connector J355.
The ACAP (U1) banks 117/118 GTM transceivers are wired to the QSFPDD4 connector J354.
The connectors are Molex connector 2147334000, rated at 112 Gb/s per lane.
The transceivers are wired in an opmized paern to be operated at 56 Gb/s per lane. This
conguraon was chosen to provide 400GAUI-8 funconality.
For connecvity details, see the table in the Transceivers secon and schemac page 58. See the
Versal ACAP GTM Transceivers Architecture Manual (AM017) for more details on GTM-Quad
conguraons.
GTM121/122/123/124/221/222/223/224: QSFPDD5/6
[Figure 3, le callout 14]
The ACAP (U1) banks 121/122/123/124 GTM transceivers are wired to the QSFPDD5
connector J359. The ACAP (U1) banks 221/222/223/224 GTM transceivers are wired to the
QSFPDD6 connector J358. The connectors are Molex connector 2147334000, rated at 112
Gb/s per lane.
The transceivers are wired in an opmized paern to be operated at 112 Gb/s per lane. This
conguraon was chosen to provide 800GAUI-8 funconality.
For connecvity details, see the table in the Transceivers secon and schemac page 59. See the
Versal ACAP GTM Transceivers Architecture Manual (AM017) for more details on GTM-Quad
conguraons.
Chapter 3: Board Component Descriptions
UG1582 (v1.0) February 21, 2023 www.xilinx.com
VPK180 Board User Guide 58
Send Feedback

Related product manuals