Table 15: NVT4857UK U23 Adapter Pinout (cont'd)
Adapter Pin Number NVT4857UKAZ Pin Number NVT4857UKAZ Pin Name
7 B3 VCCB
8 Unused Unused
9 Unused Unused
10 A3 VSD
11 A2 VCCA
12 Unused Unused
13 D1 DAT0A
14 E3 SEL
15 B1 DAT3A
16 E1 DAT1A
17 Unused Unused
18 A1 DAT2A
19 E4 DAT1B
20 D4 DAT0B
21 D3 CLKB
22 C4 CMDB
23 B4 DAT3B
24 A4 DAT2B
25 Unused Unused
For more informaon on the NVT4857UK, see the NXP website.
The detailed RFSoC connecons for the feature described in this secon are documented in the
ZCU670 board XDC le, referenced in Appendix B: Xilinx Design Constraints.
USB0 (MIO 52-63) USB 3.0 Transceiver and USB 2.0
The USB interface on the PS-side serves mulple roles as a host or device controller. The USB
3.0 interface (host mode only) is supported by the RFSoC GTR interface while the USB 2.0 (host
and device modes) capabilies of the SMSC USB3320C controller are shared on a common USB
3.0 micro USB type A connector (J18).
USB 3.0 Transceiver and USB 2.0 ULPI PHY
[Figure 2, callout 6]
Chapter 3: Board Component Descriptions
UG1532 (v1.0) March 30, 2022 www.xilinx.com
ZCU670 Board User Guide 37