The Ameri-Shred AMS-1000HD is a heavy-duty industrial shredder designed specifically for the secure destruction of hard drives and other electronic media. Its primary function is to render contained information unusable by shredding media into small, unusable particles. This ensures data security and compliance for businesses and organizations.

Function Description:

The AMS-1000HD is engineered to process a variety of electronic media, including hard drives, CDs, floppy disks, CD drives, and laptop computers. The shredder utilizes a robust cutter head assembly to break down these items into small, irregular fragments, making data recovery impossible. The machine is designed for continuous operation in demanding environments, offering reliable performance for high-volume shredding needs. An optional output conveyor can be attached to facilitate the collection and disposal of shredded material.

Important Technical Specifications:

While specific detailed technical specifications like motor horsepower, voltage, and amperage are not explicitly listed in a consolidated section, the manual provides clues and references:

Power Requirements: The electrical diagrams indicate configurations for 10 HP motors and various voltages (e.g., 460 V 3 PH-60 HZ, 230 V 3 PH-60 HZ, 208 V 3 PH-60 HZ). Users are instructed to check the nameplate for specific voltage, cycle A.C., and amperage requirements.
Shred Widths: The cutter head assembly diagrams show different shred widths available, including 1-1/2", 1", 3/4", and 3/8". There are also dual head cutter packages for 3/4" and 3/8" shred widths, and 1-1/2" and 3/8" shred widths, as well as an SSD-3/8" shred width (11" throat) option. This indicates versatility in the size of the shredded output.
Weight and Capacity: The unloading instructions mention a minimum lift truck capacity of 2500 lbs. for handling the machine, suggesting a substantial weight for the shredder itself.
Conveyor: An optional attached output conveyor (54") is available, designed to move shredded material away from the machine.
Construction: The shredder is manufactured in the United States using high-quality components and materials, emphasizing durability and craftsmanship.

Usage Features:

The AMS-1000HD is designed with operator ease and safety in mind:

Control Panel: The shredder features a straightforward control panel with clearly labeled buttons for "SHREDDER STOP" (red), "SHREDDER FORWARD" (green), "SHREDDER REVERSE" (yellow), "OFF/ON" key switch, and "POWER ON" indicator light (red).
Start-Up Procedure: A clear start-up procedure involves familiarizing oneself with controls, ensuring guards are in place, and clearing the area. The machine starts by turning the key switch ON and momentarily depressing the FORWARD pushbutton.
Jam Clearing: In case of a jam, the machine automatically turns off. Operators can momentarily depress the REVERSE pushbutton to clear the jam. If the jam persists, the manual instructs to "Lock Out Power," unlock the cutter head access door, and manually remove the offending material.
Safety Warnings: The manual includes extensive safety warnings, emphasizing the importance of reading the manual, knowing emergency stop locations, wearing safety glasses, avoiding loose clothing, and never operating the machine under the influence of drugs or alcohol. It also stresses the importance of locking out power before any maintenance or clearing operations.
Casters: The shredders are equipped with casters for easy handling and repositioning.
Feed Table: The feed table is designed for easy installation and removal.

Maintenance Features:

Regular maintenance is crucial for the longevity and optimal performance of the AMS-1000HD. The manual provides detailed schedules and instructions:

Daily Cleaning (After each 8 hours of operation):
- Remove debris and any magnets from the machine.
- Visually inspect cutters for damage.
- Inspect drive components for leaks or damage.
- Replace all guards.
Weekly Cleaning (After each 40 hours of operation):
- Repeat daily cleaning steps.
- Remove side guards and end guards.
- Remove debris buildup from the base.
- Wipe entire machine clean, checking for oil leaks.
- Check for loose hardware on reducer collars and crusher paddles.
- Remove all tools, rags, and solvents.
- Replace all guards.
Monthly Lubrication (After each 160 hours of operation):
- Repeat weekly lubrication steps.
- Remove guards.
- Check reducer oil level (refer to Reducer manual in Appendix I).
- Check oil level in spur gear oil bath.
- Grease output conveyor bearings using a multipurpose lithium-based grease (refer to Lube Schedule).
- Replace all guards.
Annual Lubrication (After 2080 hours of operation):
- Repeat steps from monthly lubrication.
- Drain oil from reducer (Consult Appendix I).
- Clean magnetic drain plug.
- Replace drain plug and refill to proper level using a high-grade petroleum base, rust and oxidation inhibited gear oil.
- Remove Spur Gear oil bath and clean bottom oil pan. Refill with 85W-140 gear oil until oil level reaches the middle of the sight glass.
Lube Schedule: A table specifies lubrication frequency and type for spur gears, reducer, cutters, chain, cutter bearings, output conveyor pulley bearings, and wear plates.
Conveyor Belt Adjustment: Instructions are provided for adjusting the conveyor belt tension and tracking, including checking after the initial 20 hours of run time due to belt stretching.
Cutter Head Adjustment: Detailed steps are given for adjusting the cutter head clearance to prevent excessive wear and ensure efficient shredding. This involves locking out power, removing guards, cleaning, checking motor rotation, and adjusting set screws.
Electrical Installation and Service: Emphasizes that all electrical work must be performed by a qualified electrician in accordance with national and local codes.

The AMS-1000HD is a robust and user-friendly shredder designed for secure and efficient destruction of electronic media, backed by comprehensive maintenance guidelines to ensure its long-term performance.

Ameri-Shred 2 Series - Page 31

Table of Contents

Related product manuals