To Next Page
C
carrie46Jul 29, 2025
Why doesn't my American Standard toilet flush?
- DDylan AdamsJul 29, 2025
If your American Standard toilet doesn't flush, it might be due to several reasons. First, check if the water supply valve is closed and open it to allow the tank to fill. Second, the supply line might be blocked; in this case, shut off the water supply, disconnect the supply line, inspect all gaskets and washers, and then reassemble. Third, the flush valve chain might be too loose or disconnected; readjust the chain length as needed. Finally, sand or debris might be lodged in the water control; shut off the water supply, remove the cap, and clean according to Fluidmaster maintenance instructions.
General
