EasyManua.ls Logo

Ametek Drexelbrook ThePoint Series - Section 4: Specifications; 4.1 Approvals Available

Ametek Drexelbrook ThePoint Series
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specications
31
 
Technology: RF/ Capacitance
Calibration: None
Modes of Operation: High and Low level
Repeatability: 2 mm (0.08 inch) conductive liquids
Response Time: less than 1 second
Time Delay: 0 to 60 seconds forward and reverse acting
Ambient Electronics: 40 to 70°C (-40 to 158°F)
Storage Temperature: -40 to 85° C (-40 to 185° F)
Indicators: LEDs: Green Power, Red relay
Power supply: Universal Supply
19 to 250 Vac
18 to 200 Vdc auto-detecting without jumper changes
Power consumption: 2 watts maximum
Relay Contacts: (one) DPDT
Maximum Contact
Load: 5A / 30 Vdc
5A / 250 Vac
Maximum Switching
Capacity: 2000 VA / 150 Watt
Minimum Contact
Load (DC): 100 mA / 12 Vdc
0 to 200 mA / 12 VDC (Optional)
Housing (electronics): Powder-coated aluminum
with two cable entries
Cable entry: M20 x 1.5 or
¾-inch NPT
Ingress Protection: IP66 NEMA 4X
Approvals: ATEX, FM / FMc, IECEx